SUGON T36 Soldering Iron With One Original JBC Bit

SUGON T36 SMD SOLDERING STATION

Parameters:

• Input Voltage: AC110V 50/60Hz, AC 220V 50/60Hz
• Power: 85W
• Temperature Range: 200℃ – 450℃ (232°F – 842°F)

Installation Notes:

A. Connection

(Attention: Turn off the power and avoid damaging the PCB during unplugging or plugging in the soldering iron handle.)

1. Plug the soldering iron handle into the appropriate host socket.
2. Install the heating element.
3. Place the soldering station and hang the soldering iron handle on the bracket.
4. Ensure the power cord is correctly plugged in.
5. Turn on the machine; the display window should show: “—”, indicating standby mode.

Temperature Setting and Storage:

Heat Up:

• Press the ↑ button once; the temperature window will display the set temperature, increasing by 1℃.
• Hold the ↑ button for at least one second; the set temperature will rapidly heat up until reaching the desired temperature.

Cool Down:

• Press the ↓ button once; the temperature window will display the set temperature, decreasing by 1℃.
• Hold the ↓ button for at least one second; the set temperature will rapidly cool down until reaching the desired temperature.

After setting the parameter data, hold the CH1 button to adjust and save the temperature. Similarly, hold the CH2 or CH3 button to set and save the storage temperature. To recall the stored memory temperature, press the CH1 button (less than 1 second). Use CH2 or CH3 to bring up their respective memory data.